ถ้าคุณสนใจสินค้า คุณสามารถกดขอใบเสนอราคา เราจะติดต่อกลับโดยเร็วที่สุด --- If you are interested. You can request a quote. We will get back to you as soon as possible.
Mikrotik RB2011UiAS-2HnD-IN 2.4GHz AP, 5x Ethernet, 5x Gigabit Ethernet, SFP cage, USB, LCD, PoE output on Eth10, 600MHz CPU, 128MB RAM

Mikrotik RB2011UiAS-2HnD-IN 2.4GHz AP, 5x Ethernet, 5x Gigabit Ethernet, SFP cage, USB, LCD, PoE output on Eth10, 600MHz CPU, 128MB RAM

฿0.00
Ex Tax: ฿0.00
Brand:Mikrotik
Product Code: RB2011UiAS-2HnD-IN
Stock Instock

Overview

The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully f...
The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. 

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. 

RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful dual chain 2.4Ghz (2312-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, USB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel- all this for only $129! 

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) 

RouterBOARD 2011UAS-2HnD-IN comes with desktop enclosure, LCD panel and power supply. 

Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.

The RB2011Ui also has passive PoE output capability on the last port (ETH10), this means you can power another device just by connecting it over regular Ethernet cable

Ethernet test results

RB2011UiAS-2HnD-INr2AR9344 1G&100M all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)122.01,481.6232.0950.3269.6138.0
Bridging25 bridge filter rules83.61,015.286.0352.387.644.9
Routingnone (fast path)122.01,481.6210.0860.2226.9116.2
Routing25 simple queues100.51,220.5103.9425.6106.654.6
Routing25 ip filter rules56.8689.859.6244.160.531.0
Specifications
Product code RB2011UiAS-2HnD-IN
Architecture MIPSBE
CPU AR9344
CPU core count 1
CPU nominal frequency 600 MHz
Dimensions 214mm x 86mm for PCB
License level 5
Operating System RouterOS
Size of RAM 128 MB
Storage size 128 MB
Storage type NAND
Tested ambient temperature -35C to +65C
Suggested price $129.00
Powering
PoE in Passive PoE
PoE out Passive PoE
PoE in input Voltage 8-30 V
Number of DC inputs 2 (DC jack, PoE-IN)
DC jack input Voltage 8-30 V
Max out per port output (input > 30 V) 0 mA
Max out per port output (input < 30 V) 510 mA
Max total out (A) 510 mA
Max power consumption 6
Max power consumption without attachments 6W
Wireless
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 4
Wireless 2.4 GHz chip model AR9344
Ethernet
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 5
Fiber
SFP DDMI Yes
SFP ports 1
Peripherals
Serial port RJ45
Number of USB ports 1
USB Power Reset Yes
USB slot type USB type A
Max USB current (A) 1
Other
PCB temperature monitor Yes
Voltage Monitor Yes

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s30-96
11MBit/s28-80
6MBit/s30-96
54MBit/s27-80
MCS030-92
MCS725-73